Improving breakdown strength and energy storage efficiency of poly(vinylidene fluoride-co-chlorotrifluoroethylene) and polyurea blend films by double layer structure design

All-organic composites are widely used in energy storage application due to the high breakdown strength performance, but the improvement of energy storage was limited by the relatively low dielectric constant. Therefore, to satisfy the high demands of dielectric materials, energy storage properties of polymer composites should be further enhanced. In this article, poly(vinylidene fluoride-co-chlorotrifluoroethylene) (P(VDF-CTFE)) and polyurea (PUA), which are known as high dielectric ferroelectric material and linearly high energy storage efficiency material respectively, are composited through double layer (DL) casting method for the first time. The properties of DL structured composite film is contrasted with solution blending structure especially in energy storage efficiency, and the results demonstrate that DL structure design can make great use of advantages of two materials and also can avoid the influence of phase separation between P(VDF-CTFE) and PUA efficiently. Moreover, high breakdown strength (6180 kV/cm) and high energy storage efficiency (77%) of DL composites can be realized simultaneously by incorporating PUA as an insulating layer, and the mechanism is discussed in detail. This work provides an effective route to improve the energy storage properties of polymer dielectric materials and shows great application potential.     

Research Progress and Application of Ion Funnel Technique

Ion funnel is a new-style ion guider which can reduce spatial divergence and energy dispersity of the transmission ions by using radio frequency (RF) electric field to confine the ions radially and the direct current (DC) axial electric field to move the ions toward the exit, and thus it can greatly increase the ion transmission efficiency and improve the sensitivity of the mass spectrometry. Since ion funnel was invented in 1997, it has attracted a close attention of mass spectrometry scientists all over the world. Ion funnel has been used in various kinds of mass spectrometry, and built a bridge with high efficiency ion transmission between low vacuum ionization source and high vacuum mass analyzer. In this paper, the principle, technology development, and application progress of ion funnel are reviewed, and the future prospects are prospected.     

Classical Backfitting for Smooth-Backfitting Additive Models

Smooth backfitting has been shown to have better theoretical properties than classical backfitting for fitting additive models based on local linear regression. In this article, we show that the smooth backfitting procedure in the local linear case can be alternatively performed as a classical backfitting procedure with a different type of smoother matrices. These smoother matrices are symmetric and shrinking and some established results in the literature are readily applicable. The connections allow the smooth backfitting algorithm to be implemented in a much simplified way, give new insights on the differences between the two approaches in the literature, and provide an extension to local polynomial regression. The connections also give rise to a new estimator at data points. Asymptotic properties of general local polynomial smooth backfitting estimates are investigated, allowing for different orders of local polynomials and different bandwidths. Cases of oracle efficiency are discussed. Computer-generated simulations are conducted to demonstrate finite sample behaviors of the methodology and a real data example is given for illustration. Supplementary materials for this article are available online.     

Microwave‐associate synthesis of Co3O4 nanoparticles as an effcient nanocatalyst for the synthesis of arylidene barbituric and Meldrum's acid derivatives in green media

In this study, Co₃O₄ nanocatalysts were constructed in environmentally appropriate conditions using controlled, effective, and facile microwave method. The final nanostructures were characterized by SEM, XRD, and TEM analyses. The products had a small size distribution, homogeneous morphology, and crystallographic structures associated with the formation of Co₃O₄ nanostructures. Moreover, EDS mapping analysis confirmed the existence of Co and O elements in the final structure, and the magnetic properties of the samples were investigated by VSM. The application of this nanostructure in a catalytic process was further examined, and the results suggested that it could be used as a novel candidate for the synthesis of arylidene barbituric and Meldrum^,s acid through Knoevenagel condensation of aldehydes by barbituric and Meldrum^,s acid in aqueous media. The high yield of these nanocatalysts would be justified by the nature of the nanostructure as well as the experimental procedure developed in this study, which affected the physicochemical features of the products.     

采用组合引导磁场的多注二极管设计

分析了采用单一同轴磁场时强流相对论多注阴极的侧端发射问题,研究了在不同磁场内半径和多注漂移管长度情况下多注电子束的传输效率。研究发现:由于引导磁场尺寸有限,高压下多注阴极杆及多注阴极柱的电子束发射是影响多注电子束传输效率的主要因素,且该部分电子束对多注漂移管入口管壁的轰击直接影响了多注速调管的重频能力。设计了采用永磁铁和同轴磁场组合工作的强流相对论多注二极管,理论分析和模拟计算证明:基于组合磁场的多注二极管可明显减弱甚至抑制多注阴极发射球头以外的电子束发射,并且组合磁场的磁场位形和强度可满足强流相对论多注电子束的高效、稳定传输。     

2,3-Disubstituted Fluorene Scaffold for Efficient Green Phosphorescent Organic Light-Emitting Diodes

Fluorene is a classic three-membered polycyclic aromatic hydrocarbon, and it has been widely used in optoelectronic devices. Here we explore a simple and efficient strategy for the derivatization at the 2- and 3- positions in fluorene unit. By introducing different types of substituents, we design two pairs of 2,3-disubstituted fluorene isomers and use them as host materials for phosphorescent organic light-emitting diodes (PHOLEDs). The green PHOLEDs hosted by these fluorene derivatives realize high external quantum efficiencies (EQE) over 20 % with low efficiency roll-off. Particularly, the devices hosted by 2TRz3TPA and 2TPA3TRz achieve nearly 24 % EQE and 104 lm W⁻¹ power efficiency. These results clearly demonstrate that the 2,3-disubstituted fluorene platforms are potentially useful for constructing host materials.     

利用静电场中光电离效率谱精确确定1,3-二乙氧基苯分子的电离能

电离能是原子和分子的重要的特性参数,在光物理和光化学过程中起着重要作用,精确电离能对相关研究具有重要意义.电离能是调试零动能光谱信号的重要参考数据,在判断异构物数量和分子构型方面也起着关键作用.1,3-二乙氧基苯是一种重要的苯的衍生物,实验证实在超声分子束中包含两种旋转异构物Ⅰ(downup)和Ⅲ(down-down).它们的精确电离能还未见文献报道.本文采用直线式飞行时间质谱仪测量了静电场中1,3-二乙氧基苯光电离效率曲线,通过不同电场强度下测量的电离能(Stark效应)对场强的平方根线性拟合给出了两种异构物Ⅰ和Ⅲ精确的电离能分别为(62419±2)cm^–1和(63378±2)cm^–1.相对于通常的脉冲电场加速机制和零动能光谱测量的电离能,精确度大约分别由(±10)cm^–1和(±5)cm^–1提高到(±2)cm^–1.分析和讨论了不同方法测量的物理机制和优缺点.     

GaAs基980 nm高功率半导体激光器的研究进展

GaAs基980 nm半导体激光器在材料加工、通信和医疗等领域有着重要应用。应变量子阱结构的出现提高了GaAs基半导体激光器的转换效率、输出功率和可靠性。本文综述了高功率GaAs基量子阱激光器历史发展,介绍了高功率半导体激光器的外延结构、芯片结构和封装结构设计,重点阐述了影响高功率GaAs基量子阱激光器光电性能、散热和实际应用的问题。针对以上问题讨论了相应解决方案及研究成果,并指出了各个方案的不足之处和改进方向。最后,总结了高功率半导体激光器的发展现状,对高功率半导体激光器发展方向进行了展望。     

染料敏化太阳能电池载流子传输的数值模拟

由于在染料敏化太阳能电池(dye-sensitized solar cell, DSSC)中存在染料弛豫、半导体薄膜中电子与氧化态染料分子发生反应和电子在电解质中与氧化态离子复合等不利反应,利用一个更完善的DSSC载流子传输模型对电池的光电性能进行模拟就显得非常重要。为此,本文基于由多重俘获理论建立的DSSC中的包括电子、染料阳离子、碘化物和三碘化物在内的载流子传输模型,数值模拟得到了不同TiO₂薄膜厚度、不同入射光强度与不同染料分子吸收系数下DSSC的J-V曲线。结果表明,随着TiO₂薄膜厚度的增加,太阳能电池的短路电流密度增大,开路电压减小,光电转换效率先增大后减小。当DSSC的TiO₂薄膜厚度为20 μm时,光电转换效率达到最大值7.41%,同时光电转换效率随入射光强度与染料分子吸收系数的增大均有一定程度提高,其中在吸收系数为4 500 cm^-1时,光电转换效率为6.73%。以上结果可以为改进DSSC的光电性能提供理论指导。     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part II

This is the part II of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS–MS) detection in LC (as opposed to the “conventional” detectors). The Part II starts with briefly introducing the main quantitation methods and then addresses the performance related to quantification: linearity of signal, sensitivity, precision, trueness, accuracy, stability and measurement uncertainty. The last section is devoted to practical considerations in validation. With every performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to handle it, specifically in the case of LC–MS methods.